Campbell Scientific CC640 Digital Camera User Manual
Page 41
CC640 Digital Camera
FIGURE 14. Task Setup
In the above example the task will execute on its own schedule separate from
data collection. A task can also be created that calls the LNCMD.EXE after
scheduled data is collected. This may be more desirable for stations that are
called using a dial up connection to eliminate separate dialling for data and
images.
To setup a task that executes after data is collected the desired station would be
selected and the Add After option would be selected in the Task Master setup
screen. A pull down menu allows various stations event types to be selected.
In this case After Any Sched Call is selected.
In the station setup the parameter Delay Before Hangup should
be Non-zero to allow the task to operate.
NOTE
35