Campbell Scientific CS215 Temperature and Relative Humidity Probe - Manual (Page 31)

Appendix B. Example Programs
B.1 CRBasic Programs
B.1.1 Example CR200(X) Program
This example program shows the measurement of a single CS215 and can be
used directly with CR200(X) series dataloggers.
'CR200(X) Series Datalogger
'Program measures one CS215 sensor every 30 seconds and stores the average
'temperature and a sample of relative humidity every 10 minutes.
'Wiring Diagram
'==============
'CS215
' Wire
' Color Function
CR200(X)
' ----- -------- -------
' Red Power (12V) Battery +
' Green SDI-12 signal C1/SDI-12
' Black Power ground G
' White Power ground G
' Clear Shield AG*
'*AG = Analog Ground (represented by ground symbol on CR200 wiring panel
'Declare the variable array for the measurement
Public TRHData(2)
Alias TRHData(1)=AirTC
Alias TRHData(2)=RH
Units AirTC=Deg C
Units RH=%
'Define a data table for ten-minute data
DataTable (TenMin,True,-1)
DataInterval (0,10,Min)
Average (1,AirTC,False)
Sample (1,RH)
EndTable
'Main Program
BeginProg
Scan (30,Sec) 'Scan every 30 seconds
'CS215 Temperature & Relative Humidity Sensor measurements 'AirTC' and 'RH'
SDI12Recorder (TRHData(),"0M!",1,0)
'Call Data Tables and Store Data
CallTable TenMin
NextScan
EndProg
B-1