Avocent L Series - Manual (Page 17)

Chapter 2: Installation 7
If you did not receive an RPC Cable Kit with your RPC cable, or if you have changed the type of
computer you are adding to the Digital Desktop System, visit our web site or contact Avocent
Technical Support before proceeding with the installation.
NOTE: The Desktop Appliance and your computer should be powered down before servicing the unit. Always
disconnect the power cord from the wall outlet.
Installing the Digital Desktop System
Figure 2.1 illustrates one possible configuration for your Digital Desktop System. The following
procedures outline how to successfully install your PCI Add In Card and Desktop Appliance.
Figure 2.1: Basic Digital Desktop System Configuration
CAUTION: To reduce the risk of electric shock or damage to your equipment -
Disconnect the power from the unit by unplugging the power cord from either the electrical outlet or the unit.
To prepare your computer for installation:
1. If your computer has integrated video or audio, restart the computer and change the BIOS set-
tings to PCI or Autodetect. Consult your computer documentation for specific instructions.
2. Save your changes and power down the computer.
3. Disconnect the keyboard, monitor, mouse and any other USB devices or audio components
that will be active at the user’s desktop.
4. Remove the computer cover to access the interface cards.
5. If applicable, remove the current video and audio interface cards from the computer.
Rack Mounted PCs
and Blades
Desktop
Appliance
PCI Add In Card
Desktop Appliance