Avocent L Series - Manual (Page 23)

Chapter 2: Installation 13
4. Remove the PCI slot blanking plate.
5. Install your third party PCI Add In Card into the Desktop Appliance as shown in Figure 2.8,
and secure it with the screw removed from the blanking plate.
Figure 2.8: Installing a Third Party PCI Add In Card
6. Reassemble the Desktop Appliance and secure the top cover with the four screws removed in
step 2.
To configure the Digital Desktop System:
1. Connect the Desktop Appliance to the PCI Add In Card inside the computer, using an appro-
priate patch cable.
2. Connect the keyboard, mouse, monitor and any other USB or audio components to the appro-
priate connectors on the Desktop Appliance.