Appendix d: technical support, Appendix c: technical specifications – Avocent L Series User Manual
Page 39
Appendices
29
Appendix C: Technical Specifications
Table C.1: Digital Desktop System Technical Specifications
PCI Add In Card Specifications
PCI
Available PCI slot, PCI standard version 2.3 (Alternate bracket provided to
accommodate PCI Low Profile Version 2.3).
Operating Systems
Red Hat® Linux® 7.1, Windows® 95/98, Windows NT®, 2000, ME and
XP. (Driver installation may be required to enable some features of the
Digital Desktop System. Additionally, not all features are available with all
operating systems. Refer to your operating system documentation.)
Minimum Requirements
As defined by your operation system.
Cabling
100 M CAT 5/5e/6, or 550 M IEEE 802.3z 1000BASE-SX fiber, configured
in a point-to-point connection. A maximum of three cable junctions
between the PCI Add In Card and Desktop Appliance or buffering device.
Desktop Appliance Specifications
Video
Video adaptor with 32 MB RAM capable of digital resolutions of up to
1280 x 1024 at 60 Hz or analog resolution of up to 2048 x 1536 at 60Hz
on two ports (DDL2x50 models).
Audio
Stereo line in and out; microphone in.
Peripherals
Supports standard USB 2.0 compliant devices; PS/2 keyboard/mouse;
Standard 9-pin serial port.
H x W x D
5.3 x 21.1 x 15.2 cm.
Shipping Weight
2.72 kg (factory configuration).
Voltage
110 to 240 VAC.
Power Frequency
47 to 63 Hz.
Environmental
Temperature
Operating: 10
o
to 35
o
C (50
o
to 95
o
F), Storage -40
o
to 65
o
C (-40
o
to
149
o
F), 20% to 80% (noncondensing).