Campbell Scientific RF401A-Series Spread Spectrum Radios - Manual (Page 35)

RF401A-Series Spread Spectrum Radio
11.3.13 Silence Time After Command Sequence
Specifies the amount of time (in tenths of seconds) that the RS-232 interface
must be silent after accepting the AT command sequence before the RF401A
series will enter command mode.
11.3.14 AT Command Mode Timeout
Specifies the amount of time (in tenths of seconds) that must elapse with no
activity on the RS-232 interface before the RF401A series exits command
mode automatically.
11.3.15 Net Address Mask
Specifies the network portion of the address mask.
11.3.16 Radio Address Mask
Specifies the radio address portion of the address mask.
12. Attribution
PakBus is a registered trademark of Campbell Scientific, Inc.
25