Campbell Scientific TX320 Transmitter - Manual (Page 48)

TX320 Transmitter
FIGURE 8-1. Settings Editor | Status in Device Configuration Utility
8.4 Using Device Configuration Utility for Troubleshooting/
Testing
8.4.1 Setting Editor | GPS
This tab displays information about the GPS communication (see FIGURE
8-2). The GPS is required for proper operation. After the transmitter is reset,
or first powered up, it can’t schedule a transmission until a GPS fix has been
established or the internal clock has been manually set.
If a GPS fix was missed, ensure that the GPS fix interval does not coincide
with the self-timed transmission interval. A GPS Fix event must occur at least
two minutes on either side of a self-timed transmission. Click Apply after
changing the setting.
38