ADIC FastStor - Manual (Page 6)

Advanced Digital Information Corporation FastStor 1
2 FastStor 1 Quick Installation Guide
Front Panel of the FastStor 1
Magazine
front
bezel LED
indicators Standby
switch LCD
display Control
buttons Magazine
front bezel
Figure 1. The FastStor 1's front side
Step 1. Unpacking the FastStor 1
Carefully unpack the unit from the shipping container. Save the container and
packing materials in case you need to transport the FastStor 1 in the future. The
packaging is specifically designed for the loader to ensure it is not damaged during
transportation.
Review the contents of the shipping container to be sure all parts were included in
the shipment. A standard package for the FastStor 1 consists of the following items:
• A factory-assembled FastStor 1 unit containing two cartridge magazines.
• A Standard Accessory Kit containing:
- 1 Warranty/Registration Card
- Rack-Mount Hardware Kit
- 2 Line Power Cords: one for USA/Japan and one for European
power outlets
- 1 VHDCI SCSI Interface Cable
- 1 VHDCI LVD/SE SCSI Terminator
- 1 Ethernet cable
- Tool for Emergency Magazine Release
- Media barcode label kit (contains media labels and cleaning
cartridge labels)
There may be variations of this list.
Note: The FastStor 1 is not shipped with tape cartridges.
Step 2. Installing the FastStor 1 in a Rack
The FastStor 1 is designed for use in a 19” rack system using 1U of rack space.
The length of the power cord and the SCSI cable may restrict the placement.