Inserting a memory card – AVERATEC 3200 User Manual
Page 24
Advertising
Getting Started — Memory
4. Pull upwards on the card and then slide the card out (2).
Inserting a Memory Card
1.
Hold the memory card by its edges with the edge-connector side towards the
slot.
2.
Hold the card at a shallow angle (about 25 degrees) and insert the edge
connector into the connector slot (3). The “gold teeth” of the edge connector
should no longer be visible when the card is fully inserted.
3.
Press the card downwards so that it is flat inside the compartment (4). You
may hear an audible click as the latches of the connector lock the card in
place.
4.
Replace the RAM compartment cover and secure it with the two screws.
Your notebook computer will automatically detect the change in RAM capacity when
turned on.
Advertising