AVERATEC 3200 - Manual (Page 27)

Getting Started — Communication Components
combination is available—you can cycle the video
output by pressing the Fn + F5 keys.
If the external CRT is connected, the display on the
LCD and the CRT is the same.
Tip: To ensure trouble-free video output, the first
time you use an external monitor, change the output in
the Display Properties dialog box. After successfully
switching modes, you may use the video function keys.
Note: Light or dark dots may appear on the LCD due to
technical limitations of LCD manufacturing. This will
not effect normal operation of the LCD.
Communication Components
This system provides powerful communication functions, including a built-in wireless
LAN, Data and Fax Modem, and wired Ethernet LAN.
Data and Fax Modem and Wireless and Wired LAN
A phone jack on the left side of the computer allows you to connect to the Internet to
send and receive data. When used with fax software, it can be used as a fax. When using
this function, first plug the phone cord into the jack. The Wireless and Wired LAN function
allows you to connect to the Internet or any network with and without wires.
Anti-electromagnetic wave clip (not included)
To eliminate electromagnetic waves, it is strongly recommended that you thread the
phone line or LAN cable through the clip provided as shown below when connecting to a
phone line or LAN cable.
Attention:
When using the data communications function, please do
not connect your notebook computer’s modem to an ISDN
or PBX jack to avoid damage to the modem.