AT&T TL7612 - Manual (Page 20)


Attach the lifter
. To choose where to install the lifter
on your telephone, look at the space
underneath the corded handset. If there
is a speaker, the lifter should be centered
over the speaker. If there is no speaker,
the lifter should be centered within the
space. Make sure the lifter arm is raised
above the switch hook of the telephone base.
. Peel off the protective strips from the
adhesive tape at the bottom of the lifter.
. Carefully place the lifter in the desired
position and press down.
Headset base and handset lifter installation
Adhesive tape
Switch hook