AT&T TL7612 - Manual (Page 23)


Headset base and handset lifter installation
Installation of large lifter pad (optional)
If the small lifter pad cannot hold the corded handset steadily, you
can attach a large lifter pad (provided) to enlarge the contact area.
. Hold the large lifter pad in front of the small lifter pad as
shown below.
. Insert the large lifter pad into the two front gaps of the small
lifter pad.
Installation of anti-slip pad (optional)
The anti-slip pad (provided) helps prevent your corded handset
from slipping from the lifter.
. Choose an appropriate position for the anti-slip pad above the
small lifter pad.
. Peel off the protective strip from the anti-slip pad.
. Carefully stick the anti-slip pad to your chosen position. You
may now place the corded handset back onto the lifter.
Adhesive tape
Protective strip