Atlantis Land I-See S 150 - Manual (Page 12)

A05-15AM-C01_MX02 12 / 45 _1
S ELECTED USER
You will enter into the user mode and you can adjust the R/G/B percentage to obtain
your satisfactory color
S
ELECTED
W-B
It will enter into the auto color balance mode, and the monitor will automatically adjust
the white-black color benchmark to obtain optimal color balance.
R, G, B ADJUSTMENT
When in “User’s mode”, the monitor will automatically enter into R/G/B adjustment
mode, push the ENTER key ,the relative options will flash, then adjust it by pressing
“+/-“ key. push ENTER again to exit.
2.2.6.3 OSD adjustment
when this item is selected, the sub-menu will pop up.
you can select the
three items to change the transparence or horizontal or
vertical position
of OSD.
2.2.7 Language( ) .
There are six languages to be selected.
• ENG.: English
• FRE.: French
• DEU.: German
• ITA.: Italian
• ESP.: Spanish
• 中文: Chinese
2.2.8 Sharpness adjustment( ):
Adjust the sharpness of the picture on the screen.
Note :that the input formats with resolutions or refresh rates higher than that supported
by LCD panel are supported as recovery modes only. This is called RealRecovery .
For example, it may be necessary to shrink the image. This may introduce image
artifacts. However, the image is clear enough to allow the user to change the display
properties.
2.3 Supported operating modes
Note :that the input formats with resolutions or refresh rates higher than that supported
by LCD panel are supported as recovery modes only. This is called Real Recovery
.For example, it may be necessary to shrink the image. This may introduce image
artifacts. However, the image is clear enough to allow the user to change the display
properties.