Atlantis Land I-See S 150 - Manual (Page 6)

A05-15AM-C01_MX02 6 / 45 _1
Important Safety instructions
1. Read these instructions carefully
2. Save this manual for later use
3. Unplug the monitor from the power source when you clean the monitor. Don’t
use liquid cleaners or aerosol cleaners. Use a cloth to clean it. If it doesn’t do,
please use LCD screen cleaners
4. Don’t use attachment not recommended as they may cause hazards.
5. Please grasp the plug to unplug the connector from the wall outlet. Do not pull
the power cord to unplug it.
6. Don’t place anything on the power cord or step on it
7. Do not place the monitor near water source such as bathtub, washbowl, sink,
laundry tub, swimming pool etc.
8. The slots are designed for ventilation, simultaneously to keep the machinery
workable and protect it from overheating. For the same reason, please do not
place the monitor on a bed, sofa, carpets or other similar surface. Do not place
the monitor near or over heat source or place in a built-in installation.
9. Keep 3 inches (76mm) away from the wall or other goods.
10. This monitor can only use the power source indicated on the label. If you have
questions, please consult your dealer.
11. As safety measure, this monitor is equipped with a three-wire ground style
plug. If you cannot insert the plug into outlet, contact your electrician to replace
your outlet. Do not defeat the safety purpose of the grounding-type plug.
12. Please make sure that the outlet and power cord can afford the total electricity
of the products.
13. Place the monitor in safe place where the cord will not be abused by persons
working on it.
14. Follow all the warnings and instructions illustrated on the manual.
15. Don’t overload the wall outlets and extend cords as this can result in fire or
electric shocks.
16. Do not remove or open the cover to service this monitor yourself. It may
expose you to dangerous voltage or other hazards before all servicing to
qualified service personnel.
17. Unplug this monitor from the outlet and refer servicing to qualified service
personnel under the following conditions.
• The power cord is frayed or damaged.
• The monitor has been dropped or the cabinet has been damaged
• When the monitor displays a distinct change in performance, this indicates a
need for service.
18. The power cord is the main device to disconnect the power.
19. Unplug the power cord when you do not use it for a long time.
20. Place the monitor in good ventilation and protect it from strong light,
overheating and damp environment.
21. This monitor must be stored in temperature –20°C ～60°C. Otherwise, it may
cause permanent damage.