American Audio Q-MX2 BPM - Manual (Page 13)

Warranty & Service:
The Q-MX2 BPM has a 2-year limited warranty. Please mail in warranty card as soon as possible to
validate your warranty.
For any service related issues please contact American DJ customer support at (800) 322-6337, Moday through
friday 9:00 am to 5:00 pm Pacific Standard Time, or contact us on the web at [email protected].
Technical Specifications - Model Q-MX2 BPM
Model: Q-MX2 BPM, 3 Channel Mixer
Power supply: AC 115/230V, 50/60Hz switchable
Dimensions: 11" W x 12.25" D x 3" H
Weight: 8 lbs. / 3.5 kg
Crossfader: Optical detecting fader start control - Low grounding impedance crossfader
Power Consumption: 5W typical, 7W w/ full headphone output
Headphone impedance: 16 Ohms
Input Sensitivity (Level/Impedence):
Line:
-14 dBV (200mV) / 12K Ohm +/- 3dB
Microphone: -59 dBV (1.2mV) / 3K Ohms +/- 3dB
Phono: -51 dBV (2.8mV) / 47K Ohms +/- 3dB
Aux: -14 dBV (200mV) / 47K Ohms +/- 2dB
Output Sensitivity (Level/Impedence): Note: 0dBV=1Vrms
Rec Out (RCA):
-10dBV (316mV) / 1K Ohms +/-3dB
Master Out (RCA): 0dBV (1V) / 560 Ohms +/- 3dB
Master Out (XLR): 0dBV (1V) / 470Ohms +/- 3dB
Phones (Load=32 Ohms): -2dBV (0.4V) /33 Oms +/-32dB
Maximum Output (Load + 47K, THD = 5%)
Rec:
< 18dBV (8V)
Master (RCA): < 18dBV (8V)
Master (XLR): < 18dBV (8V)
PHONES (Load=32 ohms): < 6dBV (2V)
Channel Balance: Within 3dB
Frequency Response:
Line:
20Hz - 20KHz, ± 1dB
Phono: 20Hz - 20KHz, ± 1.5dB (RIAA)
Aux: 20Hz - 20KHz, ± 1dB
Microphone: 20Hz - 20KHz, +1,-3dB
THD - Total Harmonic Distortion (1Khz, 0dBV Output):
Master Output (Load = 47K Ohms):
Less than 0.3%
Phono: (Load = 32K Ohms): Less than 0.3%
Cross Talk: < 40dB @ 1Khz between lef and right channels
Channel Equalizer:
Bass =
+12 ± 1dB, -22 ± 2 dB at 70KHz
Mid = +12 ± 1dB, -17 ± 2 dB at 1KHz
Treble = +13 ± 1dB, -27 ± 2 dB at 13KHz
© American DJ Supply ® - www.americandj.com - Q-MX2 BPM User Instructions page 13
TECHNICAL SPECIFICATIONS