American Audio Q-MX2 BPM - Manual (Page 8)

29. AC CONNECTION - This connection is used for your detachable AC power cord. Be sure to only plug your
unit in to the recommended power supply.
30. RCA MAIN OUTPUTS - The Master Output includes a pair XLR Balanced Jacks (23) as well as a pair
RCA Unbalanced Jacks. The RCA jacks send a low current unbalanced output signal. These jacks
should only be used for shorter cable runs to signal processors or looping to another mixer. For cable runs
greater than 10 feet use the XLR Balanced Jacks (23).
31. RCA MAIN OUTPUTS - The Master Output includes a pair XLR Balanced Jacks (23) as well as a pair
RCA Unbalanced Jacks. The RCA jacks send a low current unbalanced output signal. These jacks
should only be used for shorter cable runs to signal processors or looping to another mixer. For cable runs
greater than 10 feet use the XLR Balanced Jacks (23).
32. REC OUT - This is a low current unbalanced output source designed for various tape and CD recorders.
The Record Out (REC OUT) level is dictated by the Channel Fader Level (4), it is not influenced by the
master volume control.
33. CHANNEL 3/LINE 3 RCA INPUT JACKS - Connect CD players or Tape Decks to LINE inputs. Line level
musical instruments with stereo outputs such as Rhythm Machines or Samplers should also be connected
to LINE inputs. Turntables should only be connected to "Phono" inputs. The red colored RCA jack
represents the right channel input and the white represents the left channel input.
34. CHANNEL 3/PHONO 3 INPUT JACKS - The type of input must directly reflect the selected mode of the
Line Level Selector Switch (37). Connect turntables equipped with MM pickup cartridge to PHONO
inputs (All DJ turntable use MM pick-up cartridges). CD players or Tape Decks and other line level
instruments may be connected to these jacks as long as the Line Level Selector Switch (37) is in the
"AUX 3" position should be connected to AUX LINE input. The red colored RCA jack represents the
right channel input and the white represents the left channel input.
35. CHANNEL 2/LINE 2 RCA INPUT JACKS - Connect CD players or Tape Decks to LINE inputs. Line level
musical instruments with stereo outputs such as Rhythm Machines or Samplers should also be connected
to LINE inputs. Turntables should only be connected to "Phono" inputs. The red colored RCA jack
represents the right channel input and the white represents the left channel input.
36. CHANNEL 2/PHONO 2 INPUT JACKS - The type of input must directly reflect the selected mode of the
Line Level Selector Switch (37). Connect turntables equipped with MM pickup cartridge to PHONO
inputs (All DJ turntable use MM pick-up cartridges). CD players or Tape Decks and other line level
instruments may be connected to these jacks as long as the Line Level Selector Switch (37) is in the
"AUX 3" position should be connected to AUX LINE input. The red colored RCA jack represents the right
channel input and the white represents the left channel input.
37. LINE LEVEL SELECTOR SWITCH - This switch is used to change the mode of PHONO INPUT JACKS
(24, 36, and 39). When connecting turntable to these jacks be sure the switch is in the PHONO position,
and when using line level input devices select AUX. Always be sure main power is shut off before
change the position of the Line Level Selector Switch.
38. CHANNEL 1/LINE 1 RCA INPUT JACKS - Connect CD players or Tape Decks to LINE inputs. Line level
musical instruments with stereo outputs such as Rhythm Machines or Samplers should also be connected
to LINE inputs. Turntables should only be connected to "Phono" inputs. The red colored RCA jack
represents the right channel input and the white represents the left channel input.
39. CHANNEL 1/PHONO 1 INPUT JACKS - The type of input must directly reflect the selected mode of the
Line Level Selector Switch (37). Connect turntables equipped with MM pickup cartridge to PHONO
inputs (All DJ turntable use MM pick-up cartridges). CD players or Tape Decks and other line level
instruments may be connected to these jacks as long as the Line Level Selector Switch (37) is in the
"AUX 3" position should be connected to AUX LINE input. The red colored RCA jack represents the right
channel input and the white represents the left channel input.
© American DJ Supply ® - www.americandj.com - Q-MX2 BPM User Instructions page 8
REAR PANEL - CONTROLS AND FUNCTIONS CONT.