Name addressing – AT&T AUDIX R3.0 User Manual
Page 29
Sending Messages
_ ______________________________________________
_ ______________________________________________
_ ______________________________________________
Name Addressing
The Name Addressing feature of AUDIX Voice Power
allows callers and subscribers to enter the name of the
person they are trying to reach instead of the extension
number.
The name is entered using the letters which correspond to
touch tones on the dialpad.
The name you use for a particular subscriber is
determined by the system administrator but is usually the
subscriber’s last name.
When dialing a name, use
7
(PQRS) to represent "Q"
and use
9
(WXYZ) to represent "Z." You need not dial
the complete name, but you should dial at least three or
four letters.
If more than one name is found that matches the letters
you have dialed, AUDIX Voice Power will recite the
names found and ask you to select the appropriate name.
AUDIX Voice Power presents names in groups of 5. To
hear more names press
#
.
If you press an incorrect letter or digit, you can cancel the
input and start over by pressing
*
D
at any time.
23