AT&T AUDIX R3.0 - Manual (Page 34)

Mailing Lists
_ __________________________________________________________________
_ __________________________________________________________________ _ __________________________________________________________________
2. Press 5 to administer lists or your password.
3. Press 1 to create a list.
4. Enter a list ID (up to 6 digits) followed by # .
AT&T suggests using the letters on the buttons to
spell something meaningful for the list ID.
5. Enter each extension or name to be included in the
list followed by
#
.
At any time, you may change between extension
mode and name mode by pressing
* A
To add members via an existing mailing list, enter
* L
list owner extension (or name) #
list ID # .
6. After you have entered all extensions, names, and
lists, press * # to signal the end of the list.
At any time during creation of the list, you may use
the list editing commands discussed in the section,
Reviewing and Modifying a Mailing List.
Once a list is created, it is saved indefinitely until
you delete it.
7. Repeat Steps 4 through 6 to create additional lists.
Press
* R
to return to the activity menu.
28