Ampro Corporation COREMODULE PCI-104 - Manual (Page 5)

CoreModule 800 QuickStart Guide 1
Chapter 1 Setting Up the CoreModule 800
Using this Guide
This guide provides the most efficient way to set up your CoreModule ™ 800 SBC (single board
computer). The instructions provided in this guide include:
• Removing the CoreModule 800 from the shipping container and inventorying the accessories
• Connecting cables to the CoreModule 800 SBC
• Connecting the I/O Board, Cable Adapter Board, peripherals, boot devices, and power supply to
the CoreModule
• Powering up the CoreModule 800 SBC
Information not provided in this QuickStart Guide includes:
• CoreModule 800 Specifications
• Environmental requirements
• CoreModule 800 connector/pin numbers and definitions
• Supplied software use and programming considerations
Requirements
The following peripherals and boot devices are not provided in the QuickStart Kit, but are needed to
make full use of the CoreModule 800.
• Peripherals (Customer provided):
♦ PS/2 Keyboard
♦ PS/2 Mouse
♦ CRT (VGA) Monitor
• Power Supply (Customer provided):
♦ AT or +5V lab power supply – Typically, an AT power supply is required to provide power to
the CoreModule 800 and its associated peripherals.
• Boot Devices (one or more - Customer provided):
♦ Floppy Disk drive
♦ CD-ROM
♦ IDE hard disk drive
• Optional Devices/Connections (Customer provided):
♦ LVDS Flat Panel
♦ Ethernet connection (Ampro provided (RJ-45) board with magnetics)
♦ USB devices
What’s in the Box
Refer to the QuickStart Kit Contents Sheet for a list of the items in the shipping container.