2g. camera, Taking pictures – Samsung SPH-P100ZKASPR User Manual
Page 122
110
ࡗ
ࡗ
Taking Pictures
Taking pictures with your device’s built-in camera is as
simple as choosing a subject, pointing the lens, and
pressing a button.
To take a picture:
1.
Press
and tap
>
(
Camera
) to
activate the camera mode. (Additional camera
options are available through the camera settings
page. See “Camera Settings” on page 111 for
more information.)
2.
Holding the device in either landscape or portrait
orientation, use the display screen as a viewfinder
and aim the camera lens at your subject.
3.
Tap
to focus on an object within the focus
area and take the picture. (Your device
automatically saves the picture to the
DCIM
folder
on the microSD card.)
4.
After taking the picture, tap the
Image Viewer
box
(at the bottom-right of the screen) to view the
picture. While viewing the picture, you can either
Share
,
Set as
,
Delete
, or magnify the current image.
(See “View Your Pictures” on page 113.)
Note:
The storage card that comes installed on your device
allows you to use the camera and camcorder features.
All pictures and videos are stored on the 16GB
microSD card. The device supports SDHC cards of up
to 32GB.
Note:
The device uses a 3.0 megapixel rear facing camera
(back of the unit) and a 1.3 megapixel front facing
camera (atop the screen).
2G. Camera
Note:
To configure the front-facing camera, see “Configure
the Front -facing Camera” on page 163
SPH-P100.book Page 110 Saturday, February 5, 2011 3:00 PM