Samsung SPH-P100ZKASPR User Manual
Page 135
123
Bluet
oot
h
6.
The external device will then have to also accept
the connection and enter your device’s PIN code.
Ⅲ
Once successfully paired to an external device,
appears within the status area.
To disconnect a paired device:
Disconnecting a paired device breaks the connection
between the device and your device, but retains the
knowledge of the pairing. At a later point when you
wish to reconnect the device, there is no need to enter
the connection information again.
1.
Make sure Bluetooth is turned on.
2.
From the Bluetooth settings page, touch and hold
the previously paired device (from the bottom of
the page).
3.
Tap
Disconnect
to complete the process.
To delete a paired device (unpair):
Deleting a device from your list removes its “connection
record” and upon reconnection would require that you
re-enter all the previous pairing information.
1.
Make sure Bluetooth is turned on.
2.
From the Bluetooth settings page, touch and hold
the name of a paired device (at the bottom of the
page). This opens the connected device’s menu
options.
3.
Tap
Disconnect
or
Disconnect & unpair
to confirm
deletion.
Note:
Due to different specifications and features of other
Bluetooth-compatible devices, display and operations
may be different, and functions such as transfer or
exchange may not be possible with all Bluetooth-
compatible devices.
Note:
Pairing between two Bluetooth devices is a one-time
process. Once a pairing has been created, the devices
will continue to recognize their partnership and
exchange information without having to re-enter a
passcode again.
Note:
Disconnections are done manually but also occur
automatically if the paired device goes out of range of
your device or it is powered off.
SPH-P100.book Page 123 Saturday, February 5, 2011 3:00 PM