Samsung SPH-P100ZKASPR User Manual
Page 25
13
Dev
ice
Basics
Bluetooth Connected
– Your device’s Bluetooth
radio is active and communicating with an
external device.
GPS Location On
– Your device’s GPS is on and
available for location-based services such as
Google Maps Navigation.
GPS Communicating
– Your device’s GPS is on
and communicating.
Wi-Fi Connected
– Your device’s Wi-Fi is
connected, active, and communicating with a
Wireless Access Point (WAP).
Wi-Fi Connection Issue
– Your device’s Wi-Fi is
active but there is a communication issue with
the target Wireless Access Point (WAP).
Hotspot Activated
– Shares your device’s mobile
data connection using Sprint Hotspot.
microSD Unmounted
– Your device’s microSD
card has been disconnected (unmounted) from
the device and is now ready for either removal
or formatting.
Status Bar – Status Icons
Preparing for Mounting
– The microSD card is
being prepared for mounting to the device. This
is required for communication with the microSD
card.
microSD Removed and Missing
– The microSD
card has been properly unmounted from the
device but is missing.
microSD Unexpectedly Removed
– The microSD
card has been incorrectly removed and
improperly unmounted.
USB Connection
– The device has detected an
active USB connection.
USB Debug Connection
– The device has
detected an active USB connection and is in
USB Debugging mode.
Sign-in/Sync Error
– There has been an issue
with your connection to the Google server, or
you were not properly signed in to your account.
In order to use a Google application or sync
features, you must set up and sign in to a valid
Google account.
Status Bar – Status Icons
SPH-P100.book Page 13 Saturday, February 5, 2011 3:00 PM