Samsung SMX-C10RN-XAC - Manual (Page 106)

92_English
settings options
LCD Enhancer
Contrast is enhanced for a clear and bright image. This effect is also implemented outdoors in bright daylight.
settings contents
on-screen
display
"Off" Disables the function None
"On" LCD Enhancer is executed.
LCD Enhancer function does not affect the quality of the image being recorded.
When the LCD Enhancer works at low illumination, some stripes may occur on the LCD screen. This is not a malfunction.
Using the LCD Enhancer function may cause colour look different on the display.
•
•
•
Menu Design
You can select the desired menu design.
"MistyWhite""PremiumBlack" •
Transparency
You can select the desired transparency to display the menu.
"0%""20%""40%""60%" •
<Transparency 60%> <Transparency 0%>
Auto LCD Off
To reduce power consumption, the brightness of the LCD screen is automatically dimmed if the camcorder is idle for
more than 2 minutes.
settings contents
on-screen
display
"Off" Disables the function None
"On"
When the camcorder is idle for more than 2 minutes in Video or Photo STBY mode, or for more than 5
minutes when recording a video, the power saving mode starts by dimming the LCD screen.
None
When this “AutoLCDOff”function is enabled, you can press any button on the camcorder to return LCD
brightness to normal.
Settings
Transparency
Auto LCD Off
Menu Design
Exit Move Select
STBY 0:00:00[245Min]
40%
0%
20%
The setting value is applied to the menu screen of
Record mode only.