Samsung SMX-C10RN-XAC - Manual (Page 137)

English _123
Playback on other devices (TV, etc.)
Symptom Explanation/Solution
You cannot view the image
or hear the sound on the
connected device.
Connect the audio line of the Audio/Video cable jack to your camcorder and the
connected device (TV, DVD recorder, etc). (Red color- right, White color- left)
The Audio/Video cable jack is not connected properly. Make sure that the Audio/
Video cable jack is connected to the proper jack. ➥page 107, 109
•
•
The image appears
distorted on TV or PC
Player.
The display mode of the recorded video does not match that of playback device.
A video recorded in 16:9 wide mode should be played back on a TV or PC that
supports 16:9 screen mode.
•
•
Playback on your camcorder
Symptom Explanation/Solution
Pressing the playback
(Play/Pause) button
did not start playing.
Press the Mode ( ) button to set Movie Play mode.
Image files recorded on another camcorder may not play on your camcorder.
Check out the memory card compatibility. ➥page 40
•
•
•
The Skip or Search function
does not work properly.
If the temperature inside the camcorder is too high, it cannot function properly.
Turn the camcorder off, wait for a few moments, and turn it on again.
•
Playback is interrupted
unexpectedly.
Check if the AC adaptor or battery pack is properly connected and stable. •
You cannot hear sound
when playing a Time Lapse
recording.
The Time Lapse REC function does not support sound. ➥page 68 •
Photo images stored on
a storage media are not
displayed in the actual
size. (SMX-C13/C14 only)
Photo images recorded on other devices may not appear at actual size.
This is not an error.
•