Samsung SMX-C10RN-XAC - Manual (Page 31)

Charging the battery
You can charge the battery using the AC power adaptor or USB cable.
1. Insert the battery in the camcorder. ➥page 16
2. Press the Power (
) button to turn off the camcorder.
3. Open the connector cover of the unit.
4. Charge the battery using the AC power adaptor or USB cable.
The CHG (charge) lamp lights up and charging starts. When the
battery is fully charged, the charging (CHG) lamp turns green.
➥
page 18
Using the AC power
adaptor
Connect the AC power adaptor to the
camcorder properly and plug the AC
Power adaptor in the wall outlet.
Using the USB cable
Connect the USB cable to the camcorder
properly and connect the other end to a
USB port of a PC.
•
Charging the battery pack at low temperature may take longer or fail to fully charge (green indicator will not
turn on).
Please make sure that there are no foreign substances in the plug and socket when you connect the AC
power supply to the camcorder.
Fully charge the battery pack before use.
When using the AC power supply, place it close to the wall outlet. If you experience a malfunction while
using the camcorder, separate the AC power supply immediately from the wall outlet.
Do not use the AC power supply in a tight space, such as between furnishings.
•
•
•
•
•
When recording indoors with an available wall outlet, it is convenient to use the AC power supply instead of the
battery pack.
It is recommended to charge the battery pack in a place with ambient temperature of 50˚F~86˚F (10°C ~ 30°C).
When charging, if both the USB cable and AC power adaptor are connected, the AC power adaptor will override
the USB.
If the camcorder is turned on, the battery will still charge, but more charging time will be needed. It is recommended
you to keep the camcorder turned off while charging.
•
•
•
•
CAUTION
Connecting the AC power adaptor
~GGGG{
~GGGG{
Connecting the USB cable
~GGGG{
~GGGG{
English _17