Samsung EC-TL9ZZPBA-US - Manual (Page 43)

Shooting Options 42
Option Description
(Slow Sync)
The flash fires and the shutter stays open
longer.
Select this in the evening or in the dark.
It is a good idea to use a tripod to prevent
your photos from blurring. •
•
•
(Off)
The flash will not fire.
Camera shake warning (
) is displayed in
the dark.
•
•
(Red Eye Fix)*
The flash fires when the subject or
background is dark.
The camera corrects red-eye through its
advanced software analysis. •
•
The options may differ depending on the shooting mode.
* There is an interval between two bursts of the flash. Do not move until the
flash fires a second time.
Flash options are not available if you set burst options or select Self
Portrait or Blink Detection.
Make sure that your subjects are within the recommended distance
from the flash. (p. 87)
If there is reflected light or much dust in the air, tiny spots may
appear on your photo.
•
•
•
Adjusting the ISO speed 1
ISO speed is the measure of a film’s sensitivity to light as defined
by the International Organization for Standardisation (ISO). The
higher ISO speed you select, the more sensitive to light your camera
becomes. With a higher ISO speed, you can get a better photo
without using the flash.
1
In Shooting mode, press [Fn].
2
Press [ w] or [r] to select ISO.
3
Press [
e] or [t] to select an ISO speed option.
4
Press [MENU/OK] or [Fn].
The higher ISO speed you select, the more image noise you may
get.
When Motion Capture is set, ISO speed will be set to Auto.
When you set the ISO speed to 3200, the resolution will be set
to
.
•
•
•
Shooting in the dark