Samsung SL-M2070W-XAA - Manual (Page 142)

Installing driver over the network
142 2. Using a Network-Connected Machine
/n”<Printer name>”
or/N”<Printer
name>” Specifies printer name.
Printer instance shall be
created as specified printer
name. With this parameter, you can
add printer instances as your
wishes.
/nd or/ND Commands not to set the
installed driver as a default
machine driver. It indicates installed machine
driver will not be the default
machine driver on your
system if there are one or
more printer drivers
installed. If there is no
installed machine driver on
your system, then this option
won’t be applied because
Windows OS will set installed
printer driver as a default
machine driver.
/x or/X Uses existing machine
driver files to create printer
instance if it is already
installed. This command provides a
way to install a printer
instance that uses installed
printer driver files without
installing an additional
driver.
Command- line Definition Description
/up”<printer
name>” or/
UP”<printer
name>” Removes only specified
printer instance and not
the driver files. This command provides a
way to remove only specified
printer instance from your
system without effecting
other printer drivers. It will
not remove printer driver
files from your system.
/d or/D Uninstalls all device drivers
and applications from your
system. This command will remove
all installed device drivers
and application software
from your system.
/v”<share name>”
or/V”<share
name>” Shares installed machine
and add other available
platform drivers for Point &
Print. It will install all supported
Windows OS platform’s
machine drivers to system
and share it with specified
<share name> for point and
print.
/o or /O Opens Printers and Faxes
folder after installation. This command will open
Printers and Faxes folder
after the silent installation.
/h, /H or /? Shows Command-line Usage.
Command- line Definition Description