Samsung SL-M2070W-XAA - Manual (Page 253)

Printing problems
253 6. Troubleshooting
The machine does not
print. The machine may be configured incorrectly. Check the Printing Preferences to ensure that all of the print settings are correct.
The printer driver may be incorrectly installed. Uninstall and reinstall the machine’s driver.
The machine is malfunctioning. Check the display message on the control panel to see if the machine is indicating a
system error. Contact a service representative.
The document size is so big that the hard disk
space of the computer is insufficient to access the
print job. Get more hard disk space and print the document again.
The output tray is full. Once the paper is removed from the output tray, the machine resumes printing.
The machine selects print
materials from the wrong
paper source. The paper option that was selected in the
Printing Preferences may be incorrect. For many software applications, the paper source selection is found under the Paper tab
within the Printing Preferences (see "Opening printing preferences" on page 52).
Select the correct paper source. See the printer driver help screen (see "Using help" on
page 53).
A print job is extremely
slow. The job may be very complex. Reduce the complexity of the page or try adjusting the print quality settings.
Half the page is blank. The page orientation setting may be incorrect. Change the page orientation in your application (see "Opening printing preferences" on
page 52). See the printer driver help screen (see "Using help" on page 53).
The paper size and the paper size settings do not
match. Ensure that the paper size in the printer driver settings matches the paper in the tray.Or,
ensure that the paper size in the printer driver settings matches the paper selection in
the software application settings you use (see "Opening printing preferences" on page
52).
Condition Possible cause Suggested solutions