Samsung SL-M2070W-XAA - Manual (Page 191)

191 3. Useful Setting Menus
Network setup
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 31).
• Press (Menu)> Network on the control panel,
• Or press Setup > Machine Setup > Network Setup.
Option Description
TCP/IP (IPv4)
Selects the appropriate protocol and configure
parameters to use the network environment.
There are lots of parameters to be set. If you are
not sure, leave as is, or consult the network
administrator.
TCP/IP (IPv6)
Selects this option to use the network environment
through IPv6 (see "IPv6 configuration" on page 145).
Ethernet Configure the network transmission speed.
802.1x
You can selects the user authentication for network
communication. For detailed information consult the
network administrator.
Wi-Fi Selects this option to use the wireless network.
Protocol Mgr.
You can activate or deactivate the following protocols.
• Net. Activate: : You can set whether to use Ethernet
on or off.
• Http Activate: You can sets whether to use
SyncThru™ Web Service or not.
• WINS: You can configure the WINS server.
WINS(Windows Internet Name Service) is used in the
Windows operating system.
• SNMP V1/V2: You have to enable this option to use
SNMP V1/V2 protocol. Administrator’s can use SNMP
to monitor and manage machines on the network.
• UPnP(SSDP): You have to enable this option to use
UPnP(SSDP) protocol.
Turn the power off and on after you change
above options.
Option Description