Samsung HPS4253X-XAP - Manual (Page 16)

16
Connecting External Devices to the PDP
Note Note : To connect external devices such as a DVD or a Home Theater System to the PDP,
please refer to following instructions:
1. Be sure to remove the safety pins underneath
the PDP.
Note Note : If the safety pins are not removed,
the angle cannot be adjusted.
Any attempt to do so may cause
damage to the PDP.
2. Hold onto the bottom of the PDP and pull
forward fully as directed by the arrow as
illustrated) to adjust the angle. (0°~20° by 2°)
Insert the Safety Pins to the front guide holes on
both sides as illustrated in figure @.
Note Note : Viewing the PDP after connecting the
external devices Remove the Safety
Pins to adjust the angle to 0°, and
then secure the Safety Pins again.
• For safety, be sure to secure the PDP using
the safety pins. If the safety pins are not
used, the PDP may fall, causing serious injury.
BN68-00991B-01Eng(002~031) 2/17/06 1:56 PM Page 16