Samsung HPS4253X-XAP - Manual (Page 59)

59
Selecting an External Signal
You can use PIP to view a signal from an external source, such as a VCR.
1 Press the MENU button. Press the ▲ or ▼ button to select
“Picture”, then press the ENTER button.
2 Press the ▲ or ▼ button to select “PIP”, then press the
ENTER button.
3 Press the ▲ or ▼ button to select “Source”, then press
the ENTER button.
4 Press the ▲ or ▼ button to cycle through all of the
available signal sources:
“TV”, “AV1”, “AV2”, “S-Video1”, “S-Video2”,
“Component1”, “Component2”, “HDMI1”, or “HDMI2”.
The signal from these inputs will not appear if you
have not connected any equipment to the TV’s
respective input jacks.
5 Press the EXIT button to exit.
Notes
• The same source cannot be selected on both the main and sub screens. However, the same source
can be selected on both the main and sub screens for TV.
• PC is not available in PIP picture.
Mode : Dynamic √
Size : 16:9 √
Digital NR : On √
DNIe : On √
Film Mode : Off √
Blue Screen : Off √
PIP
Picture T V
Move Enter Return
PIP : On
Source : TV
Swap
Size
:
Position :
Channel : Air 3
PIP T V
Move Enter Return
PIP : On √
Source : TV √
Swap
Size
: √
Position : √
Channel : Air 3 √
PIP T V
Move Enter Return
TV
AV1
AV2
S-Video1
S-Video2
Component1
Component2
HDMI1
HDMI2
BN68-00991B-01Eng(052~065) 2/17/06 1:59 PM Page 59