Samsung HPS4253X-XAP User Manual
Page 44
44
Setting Up the Remote to Operate Your Set Top Box
1
Turn off your STB.
2
Press the STB button on your TV’s remote control.
3
Press the SET button on your TV’s remote control.
4
Using the number buttons on your remote control, enter
three digits of the STB code listed on page 46 of this
manual for your brand of STB. Make sure you enter three
digits of the code, even if the first digit is a “0”. (If more
than one code is listed, try the first one.)
5
Press the POWER (
) button on the remote control.
Your STB should turn on if your remote is set up correctly.
If your STB does not turn on after set-up, repeat steps 2, 3
and 4, but try one of the other codes listed for your brand
of STB. If no other codes are listed, try each code, 000
through 074.
Note on Using Remote Control Modes: STB
When your remote control is in “STB” mode, the volume buttons still
control your TV’s volume.
BN68-00991B-01Eng(032~051) 2/17/06 1:58 PM Page 44