Samsung HPS4253X-XAP - Manual (Page 107)

107
Setting the Blue Screen
If no signal is being received or the signal is very weak, a blue screen automatically replaces
the noisy picture background. If you wish to continue viewing the poor picture, you must set the
“Blue Screen“ mode to “Off“.
1 Press the MENU button. Press the ▲ or ▼ button to select
“Picture”, then press the ENTER button.
2 Press the ▲ or ▼ button to select “Blue Screen”, then
press the ENTER button.
3 Press the ▲ or ▼ button to select “Off” or “On”, then
press the ENTER button.
4 Press the EXIT button to exit.
➤ ➤
Blue Screen is displayed when there is no signal from an external
device, regardless of the Blue Screen Setting.
Mode : Dynamic
Size : 16:9
Digital NR : On
DNIe : On
Film Mode : Off
Blue Screen : Off
PIP
Picture T V
Move Enter Return
Mode : Dynamic
Size : 16:9
Digital NR : On
DNIe : On
Film Mode : Off
Blue Screen : Off
PIP
Picture T V
Move Enter Return
Mode : Dynamic √
Size : 16:9 √
Digital NR : On √
DNIe : On √
Film Mode : Off √
Blue Screen : Off √
PIP
Picture T V
Move Enter Return
Off
On
Off
On
BN68-00991B-01Eng(086~117) 2/17/06 2:01 PM Page 107