Samsung SPH-D710ZWABST - Manual (Page 147)

2J. Wi-Fi and Wi-Fi Direct 132
Scanning and Connecting to Wi-Fi
When you turn on Wi-Fi, your device searches for
available Wi-Fi connections, then displays them.
1. Press and tap > Settings.
2. If Wi-Fi is not already on, tap the Wi-Fi OFF/ON
slider to turn Wi-Fi On.
3. When your device completes a scan, touch a Wi-Fi
network to connect. If the Wi-Fi network is open,
you will be automatically connected. If the Wi-Fi
network is secured, enter the password at the
prompt to connect.
Adding a Wi-Fi Network Manually
1. Press and tap > Settings.
2. If Wi-Fi is not already on, tap the Wi-Fi OFF/ON
slider to turn Wi-Fi On.
3. On the pop-up Wi-Fi settings screen, touch Add
Wi-Fi Network (below the scanned networks), then
enter these fields:
Ⅲ Network SSID : Enter the name of the Wi-Fi
network.
Ⅲ Security : Select the type of security used by the
Wi-Fi network.
Ⅲ Password : If the network is secured, enter the
password.
4. Touch Save to save the network settings for future
use.
Boost SPH-D710_MR2_JB_.book Page 132 Monday, March 25, 2013 5:34 PM