Samsung HG55NB690QFXZA - Manual (Page 12)

12
English
Connecting to the Network
You can set up your TV so that it can access the SMART TV applications through your local area network (LAN) using a wired
or wireless connection.
✎
After you have “physically” connected your TV to your network, you must configure the network connection to complete
the process. You can configure the connection during the Initial Setup process (see page 31) or after the Initial Setup
process, through the TV’s menu.
Network Connection - Wireless
You can connect your TV to your local area network (LAN) through a standard wireless router or modem.
LAN Cable (Not Supplied)
The LAN Port on the Wall
Wireless IP Router or Modem
(router having DHCP Server)
Installing batteries (Battery size: AAA)
Match the polarity of the batteries to the symbols in the battery compartment.
X
Z
Y
After you have installed the batteries, use a screwdriver to screw in the screw that holds the battery cover
closed.
✎ NOTE
• Use the remote control within 23~33 feet of the TV.
• Bright light may affect the performance of the remote control. Avoid using near fluorescent lights or
neon signs.
• The color and shape of the remote may vary depending on the model.
[HG690_ZA]Install_Guide_00ENG.indd 12 2013-03-20 9:02:07