Samsung HG55NB690QFXZA - Manual (Page 21)

21
English
¦ Menu Items
To Enter this menu: Press the MUTE → 1 → 1 → 9 → ENTER buttons in order.
To exit from this menu : Power Off (or Power Off and unplug if you have changed SI Vendor), and then turn on again. Any
changes you made are saved.
Menu Item initial Value Description
Hospitality
Mode
Hospitality Mode Standalone
Select the Hospitality mode.
y Standalone mode: TV works alone, without an SI STB or SBB
y Interactive mode: TV works with an SI STB or SBB
SI Vendor SI Vendor OFF
y Interactive mode : Samsung / OCC / MTI / Nstreams / Enseo / Cardinal /
Guestek / Seachange / BDC / Innvne
y Standalone mode : Smoovie
Power On
Power On Channel
EN
User Defined
Set the default values that will be applied when the TV is turned on.
y User Defined : Lets you set Power On Channel and Channel Type manually. See
Power On Channel and Channel Type below.
y Last Saved : If you select this item, when the TV is turned on, it displays the
channel it was displaying when it was turned off.
Power On Channel 3
When the TV is turned on, it switches automatically to this channel when in Stand
Alone Hospitality mode.
Channel Type CATV y Select channel band : CATV (analog cable band),
Power On Volume
EN
Last Saved
Set the default volume values which will be applied when the TV is turned on.
y User Defined : Lets you set the Power On Volume manually. See Power On
Volume below.
y Last Saved : When the TV is turned on, it returns to the volume that had been set
when the power had been turned off.
Power On Volume ... TV will switch on at this Volume Level in Stand Alone Hospitality mode.
Min Volume 0 Minimum Volume Level user can set in Stand Alone Hospitality mode.
Max Volume 100 Maximum Volume Level user can set in Stand Alone Hospitality mode.
Power On Source TV Select the input source the TV displays when it is turned on.
Power On Option Last Option
Determines the TV's state when power returns after a power failure or after you have
unplugged the TV and then plugged it in again.
y Last Option: Returns to its last Power state. If it was in Stand-by, it returns to
Stand-by. If it was on, it turns on.
y Power ON : When the power returns, the TV turns on.
y Standby : When the power returns, the TV enters the Standby mode.
Channel
Channel Setup
Gives you direct, immediate access to some of the Channel menu functions on the
user Channel menu such as Auto Program, Antenna selection, etc.
Channel Editor
The Channel Editor lets you edit the channels stored in the TV's memory. Using
Channel Editor you can:
– Change the channel numbers and names, and sort the channels in your desired
channel number order.
– Apply the video mute to channels you select. The vido mute blanks out the video from
a channel and outputs only the sound while displaying a speaker icon on the screen.
The Channel Editor also lets you view information about each channel easily, without
your having to display each channel directly.
Dynamic SI ON
y ON : Check the DTV Program channel number. DTV channel editor is inaccessible.
y OFF : There is no check of the DTV Program channel number. (DTV channel editor
is accessible, but additional channel program number update is not supported)
Menu OSD
Picture Menu Lock OFF Enable or disable the Picture Menu.
Menu Display ON
y ON : Main Menu displays.
y OFF : Main Menu does not display.
Operation Panel Button Lock Unlock
Turns the front panel (Local key) operations on/off.
y Unlock : Unlocks all panel keys
y Lock : Locks all panel keys
y OnlyPower : Locks all panel keys buttons except the Power
y Menu/Source : Locks Menu and Source
Clock Local Time Manual
Select the way to update clock data.
Use clock data from a DTV channel to set the clock automatically or set the clock
manually when the TV is in stand-alone mode.
[HG690_ZA]Install_Guide_00ENG.indd 21 2013-03-20 9:02:09