Samsung LS23WHUKFK-ZA - Manual (Page 23)

Using the product 3-4
Use this button to select a function.
If you press the [ ] button when there is no OSD, the input signal (Analog/Digital) is
switched. When the input signal is switched by pressing [ ] button or the product is
turned on, a message displaying the selected input signal appears at the top left of the
screen.)
AUTO Press [AUTO] button to adjust the screen settings automatically.
This function is only available in Analog mode.
If the resolution settings are changed in the Display Properties, the AUTO adjustment func-
tion is performed.
Brightness Sensor This sensor reduces eye fatigue by automatically adjusting the display brightness according
to the surrounding environment.
Please refer to the <MagicLux> function in the OSD menu.
Press this button to turn the product on or off.
Power LED
This LED is turned on when the product works normally.
For more information on the power-saving function, refer to the power saving function
in More Information. When not using the product for a long time, unplugging the power
cord is recommended to minimize power consumption.
ICON DESCRIPTION