Samsung LS23WHUKFK-ZA - Manual (Page 30)

3-5 Using the product
SETUP&RESET
MENU DESCRIPTION
Reset Use this function to restore the visual quality and color settings to the factory defaults.
• <No> - <Yes>
Language Select a language for the OSD.
The selected language is only applied to the product OSD. This setting does not affect the other
functions of the PC.
MagicLux Automatically detects the surrounding light intensity so that the display brightness can be adjusted
appropriately.
• <Sensor Off> - <Sensitivity-Low> - <Sensitivity-Middle> - <Sensitivity-High>
• If <MagicBright> is set to <Dynamic Contrast> mode, the <MagicLux> function is disabled.
• If <MagicEco> is set to <Power Saving Off> mode, the <MagicLux> function is enabled.
• If the surrounding light intensity is 400 lux or greater, the display brightness is set to maximum.
MagicReturn
Only works in Windows 7 and recommended when using multiple monitors.
• <Off> - When <Off> is selected, the <MagicReturn> function is turned off.
• <On> - When <On> is selected, the <MagicReturn> function is turned on.
• This function does not support Analog mode.
• This function is only available for digital signal in dual model.
• This function is not available in Windows2000/XP/Vista system. It is suggested to select
<Off>.
• When the <Check Signal Cable> OSD is shown,user can keep pressing the Down Key for 5
seconds, then <MagicReturn> is set to Off automatically.
• The <MagicReturn> function may not work properly with graphics cards that are not fully
compliant with DVI specifications.If this is the case, please contact the appropriate graphics
card manufacturer or set the <MagicReturn> function to <Off>.