Samsung LS23WHUKFK-ZA - Manual (Page 29)

Using the product 3-5
SIZE & POSITION
MENU DESCRIPTION
H-Position Moves the position of the display area on the screen horizontally.
• This function is only available in Analog mode.
• <H-Position> is activated while digital or HDMI signal is input when <PC/AV Mode> is set as
<AV> and image size is set as <Screen Fit>.
V-Position Moves the position of the display area on the screen vertically.
• This function is only available in Analog mode.
• <V-Position> is activated while digital or HDMI signal is input when <PC/AV Mode> is set as
<AV> and image size is set as <Screen Fit>.
Image Size Analog signals
•
<Auto> - The picture is displayed at the aspect ratio of the input signal.
• <Wide> - The picture is displayed in full screen regardless of the aspect ratio of the input signal.
• A signal not in the standard mode table is not supported.
• If the resolution is set to the optimal resolution, the aspect ratio does not change whether
the <Image Size> is set to <Auto> or <Wide>.
Digital / HDMI signals
•
<4 : 3> - Displays pictures at the 4 : 3 aspect ratio.
• <16 : 9> - Displays pictures at the 16 : 9 aspect ratio.
• <Screen Fit> - If a 480P, 576P , 720P, 1080i or 1080P signal is input in HDMI input mode, the
picture is displayed as is without truncation.
• Requirements to activate <Image Size>
•
When connecting to digital output device via DVI/HDMI cable
• When signal resolution is 480p, 576p , 720p, 1080i, 1080p
• When <PC/AV Mode> is set as <AV>
Menu H-Position You can adjust the horizontal position of the OSD.
Menu V-Position You can adjust the vertical position of the OSD.