Samsung DV422EWHDWR-AA - Manual (Page 9)

installing your dryer _9
installing your dryer
uNpACkING YOuR DRYER
Unpack your Dryer and inspect it for shipping damage. Make sure you have received all of the items
shown below. If your Dryer was damaged during shipping, or you do not have all of the items, contact
1-800-SAMSUNG (726-7864).
To prevent personal injury or strain, wear protective gloves whenever lifting or carrying the dryer.
Packing materials can be dangerous to children. Keep all packing material (plastic bags, polystyrene,
etc.) well out of childrens’ reach
Do not move the product while holding the front part of the top cover of the dryer.
- This may cause the cover to be separated and result in injury.
Tools needed
pliers Cutting knife pipe wrench (gas only) Nut drivers
level phillips screwdriver duct tape Wrench
bASIC REquIRmENTS
Make sure you have everything necessary for proper installation
• A GROUNDED ELECTRICAL OUTLET is required. See Electrical Requirements.
• A POWER CORD for electric dryers (except in Canada).
• GAS LINES (if installing a gas dryer). The gas lines must meet national and local codes.
• EXHAUST SYSTEM - must be rigid metal or flexible stiff-walled metal exhaust ducting.
01 installing your dr
yer
WARNING
CAUTION
Top Cover
Control panel
door
Frame Front
Filter duct exhaust
[ bACK ]
HUDSON DRY_DV456_USER MANUAL_DC68-03170A-08_EN.indd 9 2014/3/19 14:20:37