Samsung HG55NC890XFXZA - Manual (Page 27)

27
English
Hotel TV Function
Description
Category Item initial value
Bathroom Speaker
Sub Amp Mode 2
Determines the Bathroom Speaker sound AMP operation mode.
• 0: Turns the Bathroom Speaker sound AMP function off (PWM off).
• 1 : The Bathroom Speaker sound volume follows the TV speaker sound volume
identically. The Bathroom Speaker sound volume is controlled by the TV remote
or panel keys.
• 2: The Bathroom Speaker sound volume is controlled by the Batroom Speaker
volume controller.
Sub Amp Volume 6 The initial Bathroom Speaker sound volume after TV is turned on.
Eco Solution Energy Saving Off
Adjusts the brightness of the TV to reduce power consumption.
• Off: Turns off the energy saving function.
• Low: Sets the TV to low energy saving mode.
• Medium: Sets the TV to medium energy saving mode.
• High: Sets the TV to high energy saving mode.
Logo/Message
Welcome
Message
OFF Displays a the Welcome Message for 5 seconds when the TV turns On.
Edit Welcome
Message
Edits the Welcome Message.
Hospitality Logo OFF
Turns the Hospitality logo feature On or Off, If On, when the TV is turned on, the
Logo is displayed, before the signal from the initial source, for the amount of time
set in "Logo Display Time".
Hospitality Logo
DL
…
Downloads the Hospitality logo.
Hospitality logo file requirements:
• BMP or AVI files only.
• Max file size : BMP - 960 X 540. AVI - 30MB.
• The file can only be named samsung.bmp or samsung.avi.
Logo Display Time … Hospitality Logo Display Time (3/5/7 seconds).
Cloning
Clone TV to USB Clone the current TV options to a USB memory device.
Clone USB to TV Clone the saved TV options on a USB memory device to the TV.
Setting Auto
Intialize
OFF
If you set Setting Auto Initialize to On, and the TV's power is turned off and on, TV
menu items are restored again to their values cloned initially. See page 36.
REACH Server
REACH 3.0 OFF
• ON : The feature of REACH 3.0 in this TV becomes available.
• OFF : The feature of REACH 3.0 in this TV becomes not available.
REACH 2.0 OFF
• ON : The feature of REACH 2.0 in this TV becomes available.
• OFF : The feature of REACH 2.0 in this TV becomes not available.
REACH Channel …
Assign a DTV channel number to carry the update REACH data. This channel
number must be the same as the number set on the Reach server.
Group ID All
Select the group ID of the REACH server. (Refer to the REACH server manual for
more details)
IPG Room Type Default
Selects the IPG room type of the REACH server. (Refer to the REACH server
manual for the more information.)
TICKER OFF
• On : The TICKER content is displayed.
• Off : The TICKER content is not displayed.
REACH Update
Time
1hour
Lets you set when data such as updated SW, cloning files, and S-LYNC REACH
contents is downloaded from the REACH server to the TV :
• 1hour : Every hour
• 2hour : Every 2 hours
• 12:00 am : every 12:00 a.m.
• 12:00 pm : every 12:00 p.m.
• 2:00 pm : every 2:00 p.m.
REACH Update
Immediate
OFF
• On : Whenever the TV enters standby mode (the power cord is plugged in
and the power is off), the REACH data is updated on the TV.
• Off : The REACH data is only updated on the TV at the REACH server update time.
Room Number … set the room number
REACH 2.0 TV
Sound
ON
• ON : Soud set in the REACH 2.0 menu is outputted.
• OFF : Soud set in the REACH 2.0 menu is mute.
REACH 2.0 Server
Version
… The version of REACH 2.0 is displayed.
Network
Network Setup
if this item is entered into, network setup menu is displayed. The network setup
menu is used for setting network like access internet.
SmartHub Model
Setting
Set SmartHub Model.
SmartHub Setting Set up SmartHub.
[HC890_ZA]Install_Guide_00ENG.indd 27 2014-04-02 1:39:20