Samsung HG55NC890XFXZA - Manual (Page 29)

29
English
Hotel TV Function
Description
Category Item initial value
System
Self Diagnosis
for TV
…
• Enter Self Diagnosis Menu.
Picture Test: Use to check for picture problems. If the problem appears in the
test picture, select Yes and follow the directions on the screen.
• Sound Test: Use the built-in melody sound to check for sound problems. If
the problem occurs during the test, select Yes and follow the directions on the
screen.
Self Diagnosis for
HTV
…
Lets you check the state of Pro:Idiom and its communication with the SI STB
or SBB. If you have any problems with the Pro:idiom encryption channel or the
communications with the SI STB or SBB, use this diagnosis function. If Pro:Idiom
DTV Channel Key Loss appears to have failed and the Pro:Idim encryption
channel has failed to play content, first check the broadcasting systems related
to Pro:Idiom encryption. If your broadcasting system does not have a problem,
contact Samsung Service. If STB SI Vendor Setting appears to have failed and
communication with the SI STB or SBB has failed, first check your SI STB or SBB.
If your SI STB or SBB does not have a problem, contact to Samsung Service.
SW Update … Lets you upgrade the TV SW with a USB memory stick. See Page 37.
Service Pattern OFF
Lets you check the state of the TV picture by displaying picture test patterns.
Press the Menu button to turn off the test patterns and exit.
ATV Cable AGC
Gain
Default
Lets you control the AGC gain of the analog cable channels. Don't change the
default value unless problems occur.
DTV Open Cable
AGC Gain
Default
Lets you control the AGC gain of the digital cable channels. Don't change the
default value unless problems occur.
Sound Bar Out OFF
If the Samsung Sound Bar device is connected to this TV, this item lets you to
select where the TV sound is outputted when the TV is turned on.
• ON : When the TV is turned on, the TV sound is automatically outputted in the
Sound Bar device only.
• OFF : When the TV is turned on, the TV sound is automatically outputted in
the TV speaker device only.
See page 39.
TV reset Returns all settings on the TV to their factory defaults.
✎
REACH (Remote Enhanced Active Control for Hospitality) is a professional, interactive remote controller that lets you
deliver TV firmware updates, cloning data, channel maping changes, REACH contents, and TICKER contents through
RF DTV to several hundred hospitality TVs simultaneously. The REACH functions are avalible only in standalone mode.
The REACH Server is sold separately. Refer to the REACH server manual enclosed with the REACH server product for
more operating information.
[HC890_ZA]Install_Guide_00ENG.indd 29 2014-04-02 1:39:21