Samsung HG55NC890XFXZA User Manual
Page 7
7
English
The Connection Panel
VIDEO
1
2
2
5
6
7
3
4
8
9
0
@ !
VIDEO
1
2
2
5
6
7
3
4
1
2
3
4
8
0
@ !
VIDEO
2
5
6
7
8 9
0
@ !
✎
Whenever you connect an external device to your TV, make sure that power on the TV and the device is turned off.
✎
When connecting an external device, match the color of the connection terminal to the cable.
1
USB (HDD/1.0A) / CLONING
– Connector for software upgrades and Media Play, etc.
– Service connection.
2
HDMI IN 1, 2, 3(ARC), 4(DVI)
: Connects to the HDMI jack of a device with an HDMI output.
✎
No separate sound connection is needed for an HDMI to HDMI connection. HDMI connections carry both audio
and video.
✎
Use the
HDMI IN 4(DVI)
jack for a DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI
adapter (DVI to HDMI) for the video connection and the
PC/DVI AUDIO IN
jacks for audio. Some DVI or HDMI
devices may not or should not need a
DVI AUDIO IN
connection for audio.
✎
It is recommended that the external device of the HDMI 1.3 or 1.4 version will be used with this TV. If you meet the
compatible problem like no sound or the abnormal screen or etc with the device of the HDMI 1.2 version, contact
to the Samsung customer care center. Refer to page 54 for the information of the Samsung customer care center.
3
LAN
: Connect to a wired LAN using CAT 7 cable.
4
ANT IN (AIR/CABLE)
– To view television channels correctly, the TV must receive a signal from one of the following sources:
– An outdoor antenna / A cable television system / A satellite receiver
5
DIGITAL AUDIO OUT (OPTICAL)
: Connects to a Digital Audio component.
6
AUDIO OUT
: Connects to the audio input jacks on an Amplifier/Home Theater.
7
EX-LINK
: Connect this jack to the jack on the optional RJP (Remote Jack Pack). This will allow you to connect external
devices (Camcoder, PC, DVD players etc.) easily.
[HC890_ZA]Install_Guide_00ENG.indd 7
2014-04-02 1:39:13