Asus Motherboard P4GE-VM - Manual (Page 53)

ASUS P4GE-VM motherboard user guide 2-21
USB 1.1 Controllers [3 Controllers]
This field allows you to select the number of USB 1.1 controllers that you wish to
activate. Configuration options: [Disabled] [3 Controllers]
USB 2.0 Controller [Enabled]
This field allows you to enable or disable the onboard USB 2.0 controller. Set to
[Enabled] if you wish to install USB 2.0 devices. Configuration options: [Disabled]
[Enabled]
Primary VGA BIOS [PCI VGA Card]
This field allows you to select the primary graphics card. Configuration options:
[PCI VGA Card] [AGP VGA Card] [Onboard VGA]
The option [Onboard VGA] appears only when the onboard VGA is either used
or enabled.
2.4.3.1 PCI IRQ Resource Exclusion
IRQ XX Reserved [No/ICU]
These fields indicate whether or not the displayed IRQ for each field is being used
by a legacy (non-PnP) ISA card. The setting [No/ICU] for an IRQ field indicates that
you are using the ISA Configuration Utility (ICU), and that this particular IRQ is
NOT required by a legacy ISA card. Set the IRQ field to [Yes] if you install a legacy
ISA card that requires a unique IRQ and you are NOT using ICU. Configuration
options: [No/ICU] [Yes]
Onboard LAN Controller [Enabled]
(appears on LAN models only)
This field allows you to enable or disable the onboard LAN controller.
Configuration options: [Disabled] [Enabled]
Onboard LAN Boot ROM [Disabled]
(appears on LAN models only)
This field allows you to enable or disable the option ROM in the onboard
LAN controller chipset. Configuration options: [Disabled] [Enabled]