Samsung HW-HM45-ZA - Manual (Page 21)

21
ENG
FUNCTIONS
USB
You can play music files located on USB storage devices through the Soundbar.
Display USB port
1. Connect the USB device to the USB port on the
back of the product.
2. Press the ( ) button on the main unit’s top
panel or the (SOURCE) button on the
remote control to select the USB mode.
3. USB appears on the display screen.
• The Soundbar connection to the USB device is
complete.
• The Soundbar automatically turns off (Auto
Power Off) if no USB device has been
connected for more than 25 minutes.
+ Before you connect a USB device
Be aware of the following:
● If the file name of a file or folder on a USB device
exceeds 10 characters, it is not displayed on the
Soundbar's display.
● This product may not be compatible with certain
types of USB storage media.
● The Soundbar supports the FAT16 and FAT32 file
systems.
- The NTFS file system is not supported.
● Connect USB devices directly to the USB port of
the product. Otherwise, you may encounter a
USB compatibility problem.
● Do not connect multiple storage devices to the
product via a multi-card reader. It may not
operate properly.
● Digital camera PTP protocols are not supported.
● Do not remove the USB device while it is
transferring files.
● DRM-protected music files (MP3, WMA) from
commercial web sites cannot be played.
● External HDDs are not supported.
● Mobile phone devices are not supported.
● File Format Type Compatibility list:
Format Codec
*.mp3
MPEG 1 Layer2
MPEG 1 Layer3
MPEG 2 Layer3
MPEG 2.5 Layer3
*.wma
Wave_Format_MSAudio1
Wave_Format_MSAudio2
*.aac
AAC
AAC-LC
HE-AAC
*.wav -
*.ogg OGG 1.1.0
*.flac FLAC 1.1.0, FLAC 1.2.1
 Supported Sampling Rate above 16KHz.