Samsung HW-HM45-ZA - Manual (Page 9)

9
ENG
REMOTE CONTROL
REMOTE CONTROL
REMOTE CONTROL BUTTONS AND FUNCTIONS
EQUALIZER WOOFER
Press to select Treble or Bass. Then, use the #,$ button to adjust
the Treble or Bass volume from -3 to +3.
You can control the subwoofer volume. Press the #,$ button to
increase or decrease the subwoofer volume. You can set it from
SW -6 to SW +6.
DIMMER/Anynet+
DIMMER : Press the DIMMER/Anynet+ button to control the
brightness of the display.
Anynet+ : Press and hold the DIMMER/Anynet+ button for more than
3 seconds to turn the Anynet+ function on or off.
(Auto Power Link : Default OFF, Anynet+ ON / Power Link Off or
Anynet+ OFF / Power Link ON ). The Anynet+ function lets you control
the Soundbar with the remote from an Anynet+ compatible Samsung
TV. The Soundbar must be connected to the TV via an HDMI cable.
* Auto Power Link
Synchronizes the Soundbar to a connected Optical source via the
Optical jack so it turns on automatically when you turn on your TV.
REPEAT
Press to set the REPEAT function during music playback from a USB
device.
REPEAT OFF : Cancels Repeat Playback.
REPEAT FILE : Repeatedly play a track.
REPEAT ALL : Repeatedly play all tracks.
REPEAT RANDOM : Plays tracks in random order.
(A track that has already been played may be played again.)
MUTE
You can turn the volume down to 0 with the push of a button.
Press again to restore the sound to the previous volume level.
SOURCE
Press to select a source connected to the Soundbar.
Skip Forward
If there is more than one file on the device you are playing, and you
press the $ button, the next file is selected.
AUDIO SYNC
If the Soundbar is connected to a digital TV and the video appears out
of sync with the audio, press the AUDIO SYNC buttons to sync the
audio with the video. Use the #,$ buttons to set the audio delay
between 0 ms and 300 ms. In USB mode, TV mode, and BT mode, the
Audio Sync function may not work.
● Soundbar is a Samsung proprietary name.
● Operate the TV using the TV's remote control.