Samsung SGH-T849ZKDTMB - Manual (Page 113)

Changing Your Settings 109
Activating Visibility
ᮣ From the Home screen, touch ➔ Settings ➔ Wireless
and network ➔ Bluetooth settings and touch Visible.
The tablet is now activated for discovery for 119 seconds
so you can pair with another device. After 119 seconds the
tablet becomes undiscoverable again.
Scanning for Devices
This option allows you to scan for active Bluetooth devices so you
can pair with them.
1. From the Home screen, touch ➔ Settings ➔ Wireless
and network ➔ Bluetooth settings and touch Scan devices.
Your tablet begins scanning and lists any discovered
devices in the Bluetooth devices section.
2. Touch a device name to pair with the device.
Important!: Some Bluetooth devices are secured and require a PIN number to
confirm and pair with them.
3. Enter a PIN to pair with the device, if one is required, and
touch OK.
Tethering and Portable Hotspots
This option allows you to share your tablet’s mobile data
connection using the USB connection or as a portable
Wi-Fi hotspot.
1. From the Home screen, touch ➔ Settings ➔ Wireless
and network ➔ Tethering.
2. Tap USB tethering. A checkmark indicates activation.
3. Tap Help for additional information about USB tethering.
VPN settings
The VPN settings menu allows you to set up and manage Virtual
Private Networks (VPNs).
Important!: Before you can use a VPN you must establish and configure one.
Adding a VPN
Before you add a VPN you must determine which VPN protocol to
use: PPTP (Point-to-Point Tunneling Protocol), L2TP (Layer 2
Tunneling Protocol), L2TP/IPSec PSK (Pre-shared key based
L2TP/IPSec), or L2TP/IPSec CRT (Certificate based L2TP/IPSec).
1. From the Home screen, press ➔ Settings ➔ Wireless
and network ➔ VPN settings.