Samsung SGH-T849ZKDTMB - Manual (Page 96)

92
3. When the scan completes, touch a Wi-Fi network to
connect. If the Wi-Fi network is open, the device
automatically connects. If the network is secured, enter
the password at the prompt.
Manually Add a New Network Connection
1. From the Home screen, press ➔ Settings ➔ Wireless
and network ➔ Wi-Fi settings.
2. Touch Wi-Fi to turn it on.
3. Touch Add Wi-Fi network, then enter information about the
network:
• Network SSID: enter the name of the Wireless Access Point.
• Security: Select the type of security used by the WAP.
• Password: If the WAP is secured, enter the password or hex key.
Note: Depending on the Security protocol used by the WAP, additional
network information may be required.
4. Touch Save to save the settings.
Wi-Fi Advanced Settings
The Wi-Fi settings - Advanced menu allows you to set up many of
the device’s Wi-Fi services, including:
• Setting the Wi-Fi sleep policy
• Viewing the device’s MAC Address
• Configuring use of either a DHCP or Static IP
To access the Bluetooth Settings menu:
1. Touch ➔ Settings ➔ Wireless and network ➔ Wi-Fi
settings.
2. Press ➔ Advanced.
For more information, refer to “Wi-Fi settings” on page 106.