Superflash, 11 superflash – Aastra Telecom 9417CW User Manual

Page 15

Advertising
background image

11

SuperFlash

The SuperFlash feature allows either of two telephone extensions to activate the link to a
Call Waiting call. When a person at either extension presses

˚, both extensions

switch to and speak with the Call Waiting caller as shown in the diagrams below.

Calls will not be disconnected when you press

˚. If you wish to return to your first

caller press

˚ again. The 9417CW and one other SuperFlash-compatible telephone

extension will switch between the two callers each time you press

˚. Once you have

switched to one caller by pressing

˚, you must wait three seconds before you can

switch back to the previous caller. When you press

˚ and see a caller’s Identification

information but only hear a dial tone, it means that the caller has hung up.

To end a call, ensure you can see that call’s identification information (you may have to
press

˚), then press ®.

Note: SuperFlash and Super Call Waiting Identification only work with SuperFlash and Super Call

Waiting Identification-compatible telephones.

You must subscribe to your telephone company for the Call Waiting with Calling Line Identification service.

Incoming caller's information

(Caller One) is displayed.

CALLER ONE

555-1234

CALLER ONE

555-1234

Extension telephone picks up

and also speaks with Caller One.

Extension

CALLER ONE

555-1234

Extension in use

>

Call Waiting tone sounds and Caller Two's

information is displayed on both extensions.

Extension

CALLER ONE

555-1234

CALLER TWO

555-5678

CALLER ONE

555-1234

CALLER TWO

555-5678

CALLER ONE

555-1234

Either telephone can press

˚

to speakwith Caller Two.

Both telephones speak to Caller Two

and see the displayed information.

CALLER ONE

555-1234

Extension

Caller Two

Either telephone can press

˚ again

to switch back to Caller One.

P0844339 04 E UG 9417CW Page 11 Thursday, April 20, 2000 11:09 AM

Advertising