Aastra Telecom 9417CW - Manual (Page 31)

27
Advanced Features
Adding a timer key
You can program any of the memory keys to be a timer key. The timer key contains a sep-
arate timer for each line
Using the Call Timer
The timer key is used to time the length of a call. The timer key contains a separate timer
for each line.
Note: To show the elapsed time of the most recent call (or last call) on each line when
you’re not on a call, press the timer key.
Deleting a timer key
To add a timer key:
1. Press the Set Options key.
2. Press
£
to enter the Setup List.
3. Use
ª
to scroll to number 6 or press
fl
.
4. Press
fl
to add a Timer key.
5. Press a memory key.
6. Press
ß
.
7. Label the timer key. (See the diagram on page 23.)
8. Press
®
.
To show the timer on the display:
1. Make or answer a call. The timer starts running automatically.
2. Once on the call, press the timer key.
The display shows the running time of the calls on either or both lines.
3. To return to the call information display, press the timer key again.
4. When the call is over, hang up the handset or press
®
. The timer stops counting.
To delete a timer key
1. Press the timer key.
2. Press
∑
twice.
P0844339 04 E UG 9417CW Page 27 Thursday, April 20, 2000 11:09 AM